Factory Cheap Hot High-Quality 219 sprocket - Roller Chain Sprocket 20B Simplex Duplex Sprockets – Tongbao

Chain sprocket or sprocket-wheel is a profiled wheel with teeth, or cogs, that mesh with a chain, track or other perforated or indented material. The name ‘sprocket’ applies generally to any wheel upon which radial projections engage a chain passing over it. It is distinguished from a gear in that sprockets are never meshed together directly, and differs from a pulley in that sprockets have teeth and pulleys are smooth.
Sprockets are used in bicycles, motorcycles, cars, tracked vehicles, and other machinery either to transmit rotary motion between two shafts where gears are unsuitable or to impart linear motion to a track, tape etc. Perhaps the most common form of sprocket may be found in the bicycle, in which the pedal shaft carries a large sprocket-wheel, which drives a chain, which, in turn, drives a small sprocket on the axle of the rear wheel. Early automobiles were also largely driven by sprocket and chain mechanism, a practice largely copied from bicycles.

We professionally produce different types of sprockets, such as:

standard sprockets,

taper bore sprockets,

special sprockets.

platewheel sprocket,

finish bore sprocket,

stock bore sprocket

chain couplings, shafts, gears, pulleys, taper bushes and racks.

All our products are produced strictly according to ISO9001 and exported to more than 50 countries.

QC Management for Roller Chain Sprokets

1.Our QC management is from the raw material to casting; from half-finished product to finished products; from beginning to the end. It is always QC controlled.

2.We have a professional and responsible QA/QC inspect team.They can secure product-tracking.